| S. No | Name of the Faculty | Publication Title | Publisher Name | Volume | Pages |
|---|---|---|---|---|---|
| 1 | 0 | Akshansha Mishra and N. Gopikrishna | applications of neural network techniques in fsw | IJRTE | 7 |
| 2 | 0 | Manoj panchal, G.Raghavendra, M. Ompraksh S. Ojha | Effect of Eggshell particulate reinforcement on Tensile Behavior of Eggshell-Epoxy Composite | Silicon | |
| 3 | 0 | M. Om Prakash,Raghavendra G, Panchal, M., & Ojha | Thermogravimetric Analysis of Biochar from Arhar Fiber Powder Prepared at Different Pyrolysis Temperatures | Silicon, | |
| 4 | 0 | M. Om Prakash,Raghavendra G, Panchal, M., & Ojha | Characterization of Porous Activated Carbon Prepared from Arhar Stalks by Single Step Chemical Activation Method | Polymer Composites | |
| 5 | 0 | M. Om Prakash,Raghavendra G, Panchal, M., & Ojha | Mechanical characterization of arhar biomass based porous nano activated carbon polymer composites | International Journal of Technology and Engineering Science [IJTES]TM |
| S. No | Name of the Faculty | Publication title | Conference Name/Organized by | National/ International |
|---|---|---|---|---|
| 1 | Manoj panchal, M. Omprakash, G.Raghavendra, | Effect of Eggshell particulate reinforcement on Tensile Behavior of Eggshell-Epoxy Composite | ICIPDIMS, NIT Rourkela | International |
| 2 | M. Om Prakash, G.Raghavendra, | Preparation and characterization of activated carbon from arharfiber and from its bio char | ICAFMD | International |
| 3 | M. Om Prakash, G.Raghavendra, | Characterization of porous activated carbon prepared from arhar stalks by single step chemical activation method | IMME19 Conference, NIT Trichy | International |
| 4 | M. Om Prakash, G.Raghavendra, | Thermogravimetric analysis of bio char from arhar fiber powder prepared at different pyrolysis temperature | ICIPDIMS, NIT Rourkela | International |
| 5 | N. Gopikrishna | Experimental study of microstructural and anti-corrosion behaviour of ni & ni-cr coating on mild steel | Elsevier - materials today | Conference |
| S. No | Name of the Faculty | Topic | Place/Organization |
|---|---|---|---|
| 1 | K.MOUNIKA | ADDITIVE MANUFACTURING | S.A ENGINEERING COLLEGE |
| 2 | M.Sathish Reddy | Creating awarenessonOBE & Research methods for Faculty | JNTU, MANTHANI |
| 3 | M.Sathish Reddy | Theory of Plasticity & its Applications | IIT, BOMBAY |
| 4 | M.Sathish Reddy | e-yantra lab set up initiative(elsi) | Vaagdevi college of Engineering,Warangal |
| 5 | M.Sathish Reddy | Development & Characterisation of Composite Materials | Lingayas Institute of Management & Technology |
| 6 | M.Sathish Reddy | Future scope for Automobile Engineering | SNS College of Technology,Coimbatore |
| 7 | M.Sathish Reddy | Industry 4.0 with design tech systems | CMR Technicak campus,Secunderabad |
| 8 | M.Sathish Reddy | Product Development Company in Pandemic situation | Chennai Institute of Technology,Chennai |
| 9 | M.Sathish Reddy | Introduction to Design of Experiments | Arasu engineering college,Kumbakonam |
| 10 | M.Sathish Reddy | Welding of Shape Memory Alloys | K.Ramakrishnan college of Tech.,Tamilnadu |
| 11 | M.Sathish Reddy | Improving your Research Visibility-Impact & Metrics | Velalar college of Engg. & Tech.,Tamilnadu |
| 12 | M.Sathish Reddy | Materials for Thermal & Renewable energy Research | Sri Sai Ram Institute of Technology,Chennai |
| 13 | M.Sathish Reddy | Awareness on Industry Safety during Covid-19 | S.A. Engineering College,Chennai |
| 14 | M.Sathish Reddy | Explore Data Integration Concepts | Chennai Institute of Technology,Chennai |
| 15 | M.Sathish Reddy | Green Building Technology | Chennai Institute of Technology,Chennai |
| 16 | M.Sathish Reddy | Online classroom post covid-19 | Siddhartha college of arts & Science,Vijayawada |
| 17 | M.Sathish Reddy | Research thrust areas in composites | Arasu engineering college,Kumbakonam |
| 18 | M.Sathish Reddy | FE Simulation of laser welding process | Kalaignarkarunanidhi Inst. Of Tech,Coimbatore |
| 19 | M.Sathish Reddy | ICT-An Efficient tool for effective teaching | Bhavans Vivekananda college,Secunderabad |
| 20 | M.Sathish Reddy | e-vehicles for sustainable transportation | Geetanjali Institute of Science & Tech,Nellore |
| 21 | M.Sathish Reddy | Industry 4.0 | Chennai Institute of Technology,Chennai |
| 22 | M.Sathish Reddy | Evolution of Industrial Robots | Chennai Institute of Technology,Chennai |
| 23 | M.Sathish Reddy | Industrial Revolution & Paradigm shift in Manufacturing | Kalaignarkarunanidhi Inst. Of Tech,Coimbatore |
| 24 | M.Sathish Reddy | Fundamentals of strength of materials | Chennai Institute of Technology,Chennai |
| 25 | Anitha.L | Brief Of Dynamic Analysis | Entuple Technologies |
| 26 | Anitha.L | Development And Characterisation Of Composite Materials | Lingayas Institute Of Management And Technology |
| 27 | Anitha.L | Digital Image Processing Using Matlab | Synxa Pvt Ltd |
| 28 | Anitha.L | Green Manufacturing: The Present &The Future | S Anthiramengineeringcollege,Nandyal |
| 29 | Gajavada Sanjeevkumar | Two Day Faculty Development Program On | Sree Chaitanya College Of Engineering, Karimnagar |
| 30 | Gajavada Sanjeevkumar | One-Week Short Term Course On | Sree Chaitanya College Of Engineering, Karimnagar |
| 31 | Gajavada Sanjeevkumar | Qip One Week Short Term Course On Theory Of Plasticity And Its Application | Iit Bombay |
| 32 | Saraiah | Therory Of Plasticity And It'S Applications | Iit Bombay |
| 33 | K. Mounika | Digital image processing using matlab | Synxa it pvt ltd |
| 34 | K. Mounika | Tools for online classroom post covid-19 | P.b.siddhartha college of arts&science,vijaywada |
| 35 | Ch Sudhakar | Tools for online classroom post covid-19 | P.b.siddhartha college of arts&science,vijaywada |
| 36 | Ch Sudhakar | Digital image processing using matlab | Synxa it pvt ltd |
| 37 | Md Ilyas Hamid | Development, Characterization and analysis of Composites | Vnr vjiet, hyderabad |
| 38 | Rachakatla.Narmada | Therory Of Plasticity And It'S Applications | Iit Bombay |
| 39 | Thirunagari Madhavi | Research And Developments In Materials Behaviour | Gla University,Madhura |
| 40 | Thirunagari Madhavi | Emerging Trends In R&Ac | Pimpri Chinchwad College Of Engineering,Pune |
| 41 | Thirunagari Madhavi | Fluid &Structural Simulation Using Cradle | Lakireddy Bali Reddy College Of Engineering, Ap |
| 42 | Thirunagari Madhavi | Technology Advancements In Mechanical Engineering | Anantha Lakshmi Institute Of Technology & Sciences |
| 43 | Thirunagari Madhavi | Recent Trends In Research Methodology | Bhimavaram Institute Of Engineering & Technology |
| 44 | Thirunagari Madhavi | Matlab Applications In Engineering And Science | Government College Of Engineering ,Karad |
| 45 | Thirunagari Madhavi | Outcome Based Education: A Step Towards Excellence | Government College Of Engineering, Karad |
| 46 | Thirunagari Madhavi | Digital Image Processing Using Matlab | Synxa Pvt Ltd |
| 47 | Thirunagari Madhavi | Development And Characterisation Of Composite Materials | Lingayas Institute Of Management And Technology |
| 48 | Thirunagari Madhavi | Advances In Mechanical Engineering & Manufacturing Processes | Cmr Institute Of Technology, Hyderabad |
| 49 | Thirunagari Madhavi | The Role Of Industry And Academia In Building Institutions And Innovations | Industry Institute Interaction Cell, Anurag University Hyd |
| 50 | Thirunagari Madhavi | Research Scopes In Composite Material | Chennai Institute Of Technology,Chennai |
| 51 | Thirunagari Madhavi | Research Scopes In Mechanical Science | Chennai Institute Of Technology,Chennai |
| 52 | Thirunagari Madhavi | Creating Awareness On Obe & Research Methods For Engg Faculty | Jntuh College Of Engineering ,Manthani |
| 53 | Thirunagari Madhavi | Corrosion And Its Control | Dypiemr,Akurdi,Pune-44 |
| 54 | Vinay Thallapally | The Role Of Industry And Academia In Building Institutions And Innovations | Industry Institute Interaction Cell, Anurag University Hyd |
| 55 | Vinay Thallapally | Research Scopes In Composite Material | Chennai Institute Of Technology,Chennai |
| 56 | Vinay Thallapally | Research Scopes In Mechanical Science | Chennai Institute Of Technology,Chennai |
| 57 | Vinay Thallapally | Creating Awareness On Obe & Research Methods For Engg Faculty | Jntuh College Of Engineering ,Manthani |
| 58 | Vinay Thallapally | Corrosion And Its Control | Dypiemr,Akurdi,Pune-44 |
| 59 | Vinay Thallapally | Research and developments in materials behaviour | Gla university,madhura |
| 60 | Vinay Thallapally | Emerging trends in r&ac | Pimpri chinchwad college of engineering,pune |
| 61 | Vinay Thallapally | Fluid &structural simulation using cradle | Lakireddy bali reddy college of engineering, ap |
| 62 | Vinay Thallapally | Tools for online classrom post covid-19 | Pb sidhartha college of arts and science |
| 63 | Vinay Thallapally | Technology advancements in mechanical engineering | Anantha lakshmi institute of technology & sciences |
| 64 | Vinay Thallapally | Recent trends in research methodology | Bhimavaram institute of engineering & technology |
| 65 | Vinay Thallapally | Outcome based education & importance of accreditation | Global institute of engineering and technology |
| 66 | Vinay Thallapally | Matlab applications in engineering and science | Government college of engineering ,karad |
| 67 | Vinay Thallapally | Digital image processing using matlab | Synxa pvt ltd |
| 68 | Vinay Thallapally | Effective proposal writing for research and funding | Sandip foundation |
| 69 | Vinay Thallapally | Development and characterisation of composite materials | Lingayas institute of management and technology |
| 70 | Vinay Thallapally | Advances in mechanical engineering & manufacturing processes | Cmr institute of technology, hyderabad |
| 71 | VINAY THALLAPALLY | RESEARCH AND DEVELOPMENTS IN MATERIALS BEHAVIOUR | GLA UNIVERSITY,MADHURA |
| 72 | VINAY THALLAPALLY | EMERGING TRENDS IN R&AC | PIMPRI CHINCHWAD COLLEGE OF ENGINEERING,PUNE |
| 73 | VINAY THALLAPALLY | FLUID &STRUCTURAL SIMULATION USING CRADLE | LAKIREDDY BALI REDDY COLLEGE OF ENGINEERING, AP |
| 74 | VINAY THALLAPALLY | TOOLS FOR ONLINE CLASSROM POST COVID-19 | PB SIDHARTHA COLLEGE OF ARTS AND SCIENCE |
| 75 | VINAY THALLAPALLY | TECHNOLOGY ADVANCEMENTS IN MECHANICAL ENGINEERING | ANANTHA LAKSHMI INSTITUTE OF TECHNOLOGY & SCIENCES |
| 76 | VINAY THALLAPALLY | RECENT TRENDS IN RESEARCH METHODOLOGY | BHIMAVARAM INSTITUTE OF ENGINEERING & TECHNOLOGY |
| 77 | VINAY THALLAPALLY | OUTCOME BASED EDUCATION & IMPORTANCE OF ACCREDITATION | GLOBAL INSTITUTE OF ENGINEERING AND TECHNOLOGY |
| 78 | VINAY THALLAPALLY | MATLAB APPLICATIONS IN ENGINEERING AND SCIENCE | GOVERNMENT COLLEGE OF ENGINEERING ,KARAD |
| 79 | VINAY THALLAPALLY | DIGITAL IMAGE PROCESSING USING MATLAB | SYNXA PVT LTD |
| 80 | VINAY THALLAPALLY | EFFECTIVE PROPOSAL WRITING FOR RESEARCH AND FUNDING | SANDIP FOUNDATION |
| 81 | VINAY THALLAPALLY | DEVELOPMENT AND CHARACTERISATION OF COMPOSITE MATERIALS | LINGAYAS INSTITUTE OF MANAGEMENT AND TECHNOLOGY |
| 82 | VINAY THALLAPALLY | ADVANCES IN MECHANICAL ENGINEERING & MANUFACTURING PROCESSES | CMR INSTITUTE OF TECHNOLOGY, HYDERABAD |
| S. No | Name of the Faculty | Publication Title | Publisher Name | Volume | Pages |
|---|---|---|---|---|---|
| 1 | 0 | B. shimrose and B. satish kumar and N. Gopikrishna | surface modifications of EN8 steel with applications of various cutting fluids during machining process | IJRE | |
| 2 | 0 | Akshansha Mishra and N. Gopikrishna | comparative mechanical and metallurgical properties analysis of fsw & Tig welded AA6061 -T6 similar joints | IJCMPER | |
| 3 | 0 | Akshansha Mishra and N. Gopikrishna | cryogenic treatment on mechanical properties of fswjoints | IJRASET | |
| 4 | 0 | N. Gopikrishna, B. Satish kumar, P. Deshmukh and P. V. Rajashekar | Design and development of a prototype - electronic langur | IJERT | 9 |
| 5 | 0 | K. Mounika | Kinematic analysis of a spatial mechanism by constant distance method | IJIRCT | 5 |
| 6 | 0 | Manoj panchal, G.Raghavendra, M. Ompraksh S. Ojha | A single step process to synthesize ordered porous carbon from coconut shells-eggshells biowaste. | Springer lecture notes | 6(11) |
| 7 | 0 | Shashikanth Ch,G Venkateshwarlu and Davidson M.J | Optimization of Process Parameters on the Mechanical Properties of Semi-Solid Extruded AA2017 Alloy Rods | Publisher_name | 6 |
| S. No | Name of the Faculty | Publication title | Conference Name/Organized by | National/ International |
|---|
| S. No | Name of the Faculty | Topic | Place/Organization |
|---|---|---|---|
| 1 | Anitha.L | Improving Your Research Visibility-Research Impact And Metrics | Velalr College Of Engineeringand Technology,Tamilnadu |
| 2 | N. Gopikrishna | Education 4.O For Industry 4.O | Nit Wgl |
| 3 | N. Gopikrishna | Study Of Manufacturing Processes - Sheet Metal Forming | Nit Wgl |
| 4 | N. Gopikrishna | Advanced Engineering Materials For Strategic &Societal Sectors | Vel Tech High Tech R S Engineering College |
| 5 | N. Gopikrishna | Applications Of Cad Tools In Drawing | Geethanjali College Of Engineering |
| 6 | N. Gopikrishna | Materials: Recent Trends & Engineering Application | Griet |
| 7 | N. Gopikrishna | Emerging Trends In Refrigeration And Air Conditioning | Pimpri Chinchwad College Of Engineering And Research |
| 8 | M.Sathish Reddy | Computational Research Techniques using MAT LAB | Sreechaitanya college of Engineering,Karimnagar |
| 9 | M.Sathish Reddy | Faculty Induction Training Program | IIT, HYDERABAD |
| 10 | M.Sathish Reddy | Green Manufacturing | Sreechaitanya College of Engineerig,Karimnagar |
| 11 | M.Sathish Reddy | Intellectual property Rights & Patents | Sreechaitanya College of Engineerig,Karimnagar |
| 12 | M.Sathish Reddy | Introduction to Remote lab & Virtual lab | Birla Institute of Tech. & Sciences,Hyderabad |
| 13 | Anitha.L | Computational Research Techniques Using Matlab | Sree Chaitanya College Of Engineering Karimnagr |
| 14 | Anitha.L | Green Manufacturing | Sree Chaitanya College Of Engineering, Karimnagr |
| 15 | Anitha.L | Effective Facilitation Skills | Sree Chaitanya College Of Engineering, Karimnagr |
| 16 | Anitha.L | Intellectual Property Rights And Patents | Sree Chaitanya College Of Engineering, Karimnagr |
| 17 | Anitha.L | Introduction To Remote Lab And Virtual Lab | Bits Pilani,Hyd |
| 18 | Gajavada Sanjeevkumar | Three Week Faculty Induction Training Program | Iit Hyderabad |
| 19 | Gajavada Sanjeevkumar | One-Week Workshop On Computational Research Techniques Using Matlab | Sree Chaitanya College Of Engineering, Karimnagar |
| 20 | Gajavada Sanjeevkumar | Two Day Faculty Developement Program On Effectve Facilitation Skills | Sree Chaitanya College Of Engineering, Karimnagar |
| 21 | Saraiah | Effective Facilitation Skills | Sree Chaitanya College Of Engineering Karimnagr |
| 22 | Saraiah | Intellectual Property Rights And Patents | Sree Chaitanya College Of Engineering, Karimnagr |
| 23 | Saraiah | Computational Research Techniques Using Matlab | Sree Chaitanya College Of Engineering Karimnagr |
| 24 | Md Ilyas Hamid | One Week Gian Course On Composite Materials | IIT kharagpur |
| 25 | Rachakatla.Narmada | Effective Facilitation Skills | Sree Chaitanya College Of Engineering Karimnagr |
| 26 | Rachakatla.Narmada | Intellectual Property Rights And Patents | Sree Chaitanya College Of Engineering, Karimnagr |
| 27 | Rachakatla.Narmada | Computational Research Techniques Using Matlab | Sree Chaitanya College Of Engineering Karimnagr |
| 28 | Thirunagari Madhavi | Effective Facilitation Skills | Sree Chaitanya College Of Engineering Karimnagr |
| 29 | Thirunagari Madhavi | Intellectual Property Rights And Patents | Sree Chaitanya College Of Engineering, Karimnagr |
| 30 | Thirunagari Madhavi | Introduction To Remote Lab And Virtual Lab | Bits Pilani,Hyd |
| 31 | Thirunagari Madhavi | Problem Solving And Decision Making | Sree Chaitanya College Of Engineering Karimnagr |
| 32 | Thirunagari Madhavi | Computational Research Techniques Using Matlab | Sree Chaitanya College Of Engineering Karimnagr |
| 33 | Vinay Thallapally | Implementation Of Induction Program | Jntuh Hyderabad |
| 34 | Vinay Thallapally | Computational Research Techniques Using Matlab | Sree Chaitanya College Of Engineering Karimnagr |
| 35 | Saraiah | Green Manufacturing | Sree Chaitanya College Of Engineering Karimnagr |
| 36 | Rachakatla.Narmada | Green Manufacturing | Sree Chaitanya College Of Engineering Karimnagr |
| 37 | Thirunagari Madhavi | Green Manufacturing | Sree Chaitanya College Of Engineering Karimnagr |
| 38 | B. Ravindar | National Workshop on 3D Printing | Vaageswari College of Engineering, Karimnagar |
| 39 | B. Ravindar | International Conference on Innovations & Discoveries in Science and Management (Section chair person) | Vaageswari College of Engineering, Karimnagar |
| S. No | Name of the Faculty | Name of the Course | Score |
|---|
| S. No | Name of the Faculty | Publication Title | Publisher Name | Volume | Pages |
|---|---|---|---|---|---|
| 1 | 0 | Akshansha Mishra and N. Gopikrishna | evaluation of Young's modulus & poisons ratio using bulge test | IJRET | |
| 2 | 0 | V. Devender, V. Mahesh and N. Gopikrishna | analysis of tools used in fsw process | JARMET | |
| 3 | 0 | B.Ravindar, Dr K. Eswaraiah | Comparison of Pulsed TIG Welding and FSW Processes of 5083 Aluminium Alloy | JETIR | 118 |
| 4 | 0 | B.Ravindar, B.Naresh, Md. Asifuddin and Md. Abdul hadi | Design and fabrication of Agro vehicle for ploughing | (JETIR), | 5 |
| 5 | 0 | B.Ravindar, M. Kiran Kumar, K. Rajashekar, G. Rajkumar | Design and fabrication of stair climbing | (IJPCIP) | 5 |
| 6 | 0 | B.Ravindar, M. Kiran Kumar, K. Rajashekar, G. Rajkumar | fabrication of stair climbing trolly using ANSYS Analysis | Springer lecture notes | 4 |
| 7 | 0 | Manoj panchal, G.Raghavendra, M. Ompraksh S. Ojha | Moisture absorption behavior of treated and untreated eggshell particulate epoxy composites .silicon,springer | Silicon | 10(3) |
| 8 | 0 | Manoj panchal, G.Raghavendra, M. Ompraksh S. Ojha | Effects of Environmental Conditions on Erosion Wear of Eggshell Particulate Epoxy Composites | Materials Research Express | 10(2) |
| 9 | 0 | M. Om Prakash,Raghavendra G, Panchal, M., & Ojha | Distinct Environment on the Mechanical Characteristics of Arhar Fiber Polymer Composites | Polymer Composites | 10(3) |
| 10 | 0 | M. Om Prakash,Raghavendra G, Panchal, M., & Ojha | ). Effects of environmental exposure on tribological properties of Arhar particulate/epoxy composites | Materials Today: Proceedings | 39(9) |
| S. No | Name of the Faculty | Publication title | Conference Name/Organized by | National/ International |
|---|---|---|---|---|
| 1 | M. Om Prakash, G.Raghavendra, | Effect of temperature on physicochemical properties of bio char prepared from arhar fiber | Ramsa 17 international conference | International |
| S. No | Name of the Faculty | Topic | Place/Organization |
|---|---|---|---|
| 1 | Anitha.L | Recent Trends In Automobile Engineering | Sree Chaitanya College Of Engineering Karimnagr,Nittr |
| 2 | Saraiah | Recent Trends In Automobile Engineering | Sree Chaitanya College Of Engineering Karimnagr,Nittr |
| 3 | Rachakatla.Narmada | Recent Trends In Automobile Engineering | Sree Chaitanya College Of Engineering Karimnagr,Nittr |
| 4 | Thirunagari Madhavi | Recent Trends In Automobile Engineering | Sree Chaitanya College Of Engineering Karimnagr |
| 5 | B. Ravindar | One Week Faculty Development Program on | Chaitanya Bharathi Institute of Technology, Hyderabad |
| 6 | B. Ravindar | One Week Faculty Development Program on Challenging and Advances in Renewable Energy Source | Kamala Institute of Technology & Science, Singapur, Karimnagar |
| S. No | Name of the Faculty | Name of the Course | Score |
|---|
| S. No | Name of the Faculty | Publication Title | Publisher Name | Volume | Pages |
|---|---|---|---|---|---|
| 1 | 0 | Vinay Thallapally | Aerodynamics Study Of Co2 Car Design | JASC | 5 |
| 2 | 0 | Md Ilyas Hamid | Modeling and analysis of friction stir welding on al alloy 6061 | IJIRCT | 3(2) |
| 3 | 0 | M.Meghana,Ch.Shashikanth and M.Pradeep kumar | Impact Analysis of Bumper and Car Chassis Frame Due to Frontal Collision for Different Materials | Journal of Materials at High Temperature | 56(1) |
| S. No | Name of the Faculty | Publication title | Conference Name/Organized by | National/ International |
|---|---|---|---|---|
| 1 | G. Raghavendra, M Om Prakash | Effect of different environments on the mechanical properties of arhar filler polymer composite | 3rd International Conference on Bio-based Polymers and Composites(BiPoCo) | International |
| S. No | Name of the Faculty | Topic | Place/Organization |
|---|---|---|---|
| 1 | Md Ilyas Hamid | Computational fluid dynamics & its applications in engineering | JNTUH hyderabad |
| 2 | B. Ravindar | State Level Technical Symposium | Nigama Engineering College, Karimnagar |
| 3 | B. Ravindar | One Week Faculty Development Program on | Kakatiya Institute of Technology & Science, Warangal |
| 4 | B. Ravindar | A short-term training program on | Gokaraju Rangaraju Institute of Engineering and Technology, Hyderabad |
| S. No | Name of the Faculty | Name of the Course | Score |
|---|
| S. No | Name of the Faculty | Publication Title | Publisher Name | Volume | Pages |
|---|---|---|---|---|---|
| 1 | 0 | Md Ilyas Hamid | Modeling and Optimization of Electrical Discharge Machining Process Parameters using Artificial Neural Network | International Journal of Applied Engineering Research | 1(4) |
| 2 | 0 | B. Ravindar, J. Laxman and Dr.K. Gururaj | Certain Investigations on the effect of Pulsed Tungsten inert gas welding parameters on Aluminium (5083) alloy | 10(4) | |
| 3 | 0 | B. Ravindar and Dr.K. Gururaj | Influence Of Process Parameters On Aluminium Alloy 5083 In Pulsed Gas Tungsten Arc Welding | International Journal of Innovative Research in Science, Engineering and Technology | 3(7) |
| 4 | 0 | B. Ravindar and Dr.K. Gururaj | Effects of Friction Stir Welding Parameters on Butt Joint Properties of Aluminium Alloy 5083 | IJESRT | 4(7) |
| 5 | 0 | B. Ravindar, Dr. K. Gururaj, Dr.A.Somi Reddy | The influence of process parameters on microhardness and mechanical properties of FSW aluminium 5083 alloy butt joint | IJISET | 4(11) |
| 6 | 0 | B. Ravindar, Dr. K. Gururaj, Dr.A.Somi Reddy | Mechanical and Microstructure properties of Pulsed Tungsten Inert Gas and FS Welding of AA5083 Butt joint | IJAERS | 3 |
| 7 | 0 | B. Ravindar, Dr. K. Gururaj, Dr.A.Somi Reddy | Comparative investigations of FS welding and Pulsed TIG welding processes of 5083 Aluminum Alloys | International Journal of Pure and Applied Mathematics | 3 |
| S. No | Name of the Faculty | Publication title | Conference Name/Organized by | National/ International |
|---|---|---|---|---|
| 1 | B. Naresh, B. Ravindar and A. Mamatha | Synthesis And Measurement Of Thermal Conductivity Of Magenetite Fe3o4 Nano Particles | National Conference on Innovative Research in Engineering & Technology | National |
| 2 | B.Ravindar, B.Naresh, Dr. K. Gururaj and Dr.Ch.Srinivas | Solid State Alloying of Aluminium Alloys: A Mechanical Alloying approach | National Conference on Innovative Research in Engineering & Technology | National |
| 3 | B. Ravindar, J Laxman and Dr.K. Gururaj | Certain Investigations on the effect of Pulsed tungsten inert gas welding parameters on Aluminium (5083) alloy | ICRTIET-2015 | International |
| 4 | B. Ravindar and k. Gururaj | Influence of Process Parameters on Aluminium Alloy In Pulsed Gas Tungsten Arc Welding | International conference | International |
| 5 | Thirunagari Madhavi | Optimisation of | Two-Day National Conference on Recent Trends in Science and Technology (NCRTST- 2015) | National |
| 6 | Thirunagari Madhavi | Optimisation of Turning Process Parameters on EN 24 Steel using Taguchi Technique | Two-Day National Conference on Recent Trends in Science and Technology (NCRTST- 2015) | National |
| 7 | CH.Shashikanth | Determination of material constants and Zener-Hollomon parameter of AA 2017 aluminium alloy under hot compression test | XIII International Conference on manufacturing Engineering | International |
| S. No | Name of the Faculty | Topic | Place/Organization |
|---|---|---|---|
| 1 | M.Sathish Reddy | RICE | Jyothishmathi Institute of Tech. & Sciences,knr |
| 2 | Saraiah | Advances In Material Sciences And Manufacturing Process | Sree Chaitanya College Of Engineering ,Karimnagr |
| 3 | Rachakatla.Narmada | Advances In Material Sciences And Manufacturing Process | Sree Chaitanya College Of Engineering ,Karimnagr |
| 4 | Thirunagari Madhavi | Advances In Material Sciences And Manufacturing Process | Sree Chaitanya College Of Engineering ,Karimnagr |
| 5 | Vinay Thallapally | Advances In Material Sciences And Manufacturing Process | Sree Chaitanya College Of Engineering ,Karimnagr |
| 6 | CH.Shashikanth | Faculty development program on Computational Fluid Dynamics Organized by Department of Mechanical | SREE CHAITHANYA COLLEGE OF ENGGINEERING |
| 7 | B. Ravindar | National Conference on Innovative Research in Engineering & Technology (NCIRET-2015) Delivered on Industrial Revolution | Vaageswari College of Engineering, Karimnagar |
| S. No | Name of the Faculty | Name of the Course | Score |
|---|
| S. No | Name of the Faculty | Publication Title | Publisher Name | Volume | Pages |
|---|---|---|---|---|---|
| 1 | 0 | K. Praveen Kumar and CH.Shashikanth | Design &Analysis of Composite Leaf Spring | International Journal of Engineering and Management Research | 2(11) |
| 2 | 0 | CH.Shashikanth and Dr. M. J. Davidson | Experimental and simulation studies on thixo-forming of AA 2017 alloy | Journal of Materials at High Temperature | 32 (6) |
| 3 | 0 | CH.Shashikanth and Dr. M. J. Davidson | Simulation studies on the deformation behaviour of AA 2017 alloy in the semi-solid state using FEA | International Journal of Materials Forming and Machining Processes | 31(3) |
| S. No | Name of the Faculty | Publication title | Conference Name/Organized by | National/ International |
|---|
| S. No | Name of the Faculty | Topic | Place/Organization |
|---|---|---|---|
| 1 | M.Sathish Reddy | A National level CULTECHSPO-FUSION | Jyothishmathi Institute of Tech. & Sciences,knr |
| 2 | CH.Shashikanth | One day National Workshop on New paradigms in manufacturing | NIT Warangal |
| 3 | CH.Shashikanth | Innovations in materials and processes and transfer of technology to industries | NIT Warangal |
| 4 | CH.Shashikanth | Five-Day Short Term Course on Essential Techniques for Research Problems in Materials and Manufacturing | NITW |
| 5 | CH.Shashikanth | Two-Week ISTE Workshop on Fluid Mechanics | IIT Karaghpur |
| 6 | B. Ravindar | Three Day National Workshop on Friction Stir Welding, NDT and Optimization | National Institute of Technology, Warangal |
| 7 | B. Ravindar | A One Day Workshop on | The Indian Institute of Welding, Hyderabad Branch |
| S. No | Name of the Faculty | Name of the Course | Score |
|---|